Version 4, 11.10.2026
Symbols
| Symbol | Meaning |
|---|---|
| ⚠️ | Warning |
| ❗ | Important |
| 💡 | Tips and recommendations |
| ℹ️ | Reference information |
Caution
TOPODRONE Sony ILX-LR1 with LR1 Control Module is a photogrammetric system for aerial survey with data processing in TOPODRONE software. The system consists of the Sony ILX-LR1 industrial full-frame camera (61 MP, mechanical shutter), the DJI X-Port 3-axis gimbal and the TOPODRONE LR1 Control Module with a built-in survey-grade GNSS receiver. The system obtains high-precision coordinates of the camera centers in two modes: PPK - from raw satellite measurements that the receiver records to a microSD memory card, and RTK - from corrections of the RTK module built into the DJI drone.
DO NOT store the equipment in direct sunlight, in poorly ventilated places or near a heat source.
Avoid direct sunlight entering the camera lens.
DO NOT turn the equipment on and off for short periods. Wait at least 30 seconds before turning it on or off again.
The equipment is not protected against moisture and dust, so use in a humid or dusty environment may cause malfunction.
When the equipment is not in use, store it in the protective case. It is recommended to store the equipment at a relative humidity of no more than 40% and a temperature of 20±5°C.
DO NOT insert or remove memory cards while the camera and the LR1 Control Module are operating.
Do not touch the lens surface with your hands or sharp objects - you can damage the coating, which degrades image quality.
DO NOT detach the lens while the camera is operating.