The TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT is a high-precision surveying instrument. It is strongly recommended to handle the receiver carefully to extend the service life of the TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT.
DO NOT operate the TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT in any way not specified or described in this «User Manual».
DO NOT expose the TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT to shocks or vibration, especially when it is switched on: do not drop, hit, scratch, toss, shake or knock it.
DO NOT store the TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT in direct sunlight, in poorly ventilated places, or near sources of cold or heat.
DO NOT expose the TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT to water, heavy rain, snow, sand or dust. The TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT is not protected against moisture and dust, so using it in humid (above 90%) or dusty environments may cause malfunction, degraded performance or corrosion, which may lead to failure of the device.
DO NOT insert foreign objects into the memory card, LEMO 6-Pin or external GNSS antenna connectors, and do not insert the memory card upside down.
DO NOT insert or remove the MicroSD memory card while the TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT is running, as this may damage the card or cause data loss. To remove the MicroSD card safely, switch off the device and wait until it shuts down.
DO NOT open the outer cover of the TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT.
When the TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT is not in use, store it indoors at a relative humidity of no more than 40% and a temperature of 20±5°C.
If moisture gets on the TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT during work due to rain, snow or fog, wipe it with a clean dry paper or microfiber cloth and leave it in a dry room for an hour until completely dry. Then put the TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT away for storage or transport. For long-term storage, a small bag of silica gel can be used to absorb moisture.
The TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT uses PPK technology and requires GNSS data from a base station for its operating period for data post-processing.
To get correct data from the TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT, the GNSS signal during work must be of the best possible quality, both for the receiver itself and for the base station.
In case of intentional or accidental violation of any of the above requirements, the manufacturer does not guarantee the operability of the TOPODRONE DJI MAVIC 2 PRO PPK UPGRADE KIT