About this manual

About this manual

Symbols

Warning

Important

Tips and recommendations

Reference information

Attention

TOPODRONE P24 is a photogrammetric camera for surveying terrain objects with subsequent processing in any photogrammetric software. The TOPODRONE UAV PPK UPGRADE KIT geodetic receiver working together with the camera provides high-precision photo center coordinates by synchronizing both devices via a cable. The GNSS receiver records raw measurements in *.UBX format and shutter release timestamps.
DO NOT store the TOPODRONE P24 in direct sunlight, in poorly ventilated places or near a heat source.
Avoid direct sunlight entering the TOPODRONE P24 lens.
DO NOT switch the device on and off for short periods. Wait at least 30 seconds before switching the device on or off.
The TOPODRONE P24 photogrammetric camera is not protected against moisture and dust, so using it in humid and dusty environments may cause malfunction.
When the TOPODRONE P24 is not in use, store it in the protective case in which it is supplied. It is recommended to store the equipment at a relative humidity of no more than 40% and a temperature of 20±5°C.
DO NOT insert or remove the memory card while the camera is working.
Do not touch the lens surface with your hands or any sharp objects, otherwise you may damage it, which will affect image quality.
DO NOT detach the lens while the camera is working.

Was this article helpful?