TOPODRONE SWIR is a high-precision optical and geodetic measuring instrument that requires careful and accurate handling to ensure a long service life.
TOPODRONE SWIR is a photogrammetric camera designed for surveying of terrain objects with subsequent processing of materials in any photogrammetric software. TOPODRONE UAV PPK UPGRADE KIT geodetic receiver, working together with the camera, allows you to obtain high-precision coordinates of the centres of photography, synchronising both devices by cable. The GNSS receiver records ‘raw’ measurements in *.UBX format, as well as time stamps of shutter operation. For stable and continuous operation of the device, it is important to observe the following prohibitions and recommendations for safe operation.
DO NOT operate the TOPODRONE SWIR at temperatures outside the operating limits specified in the specifications.
DO NOT place the TOPODRONE SWIR in direct sunlight, poorly ventilated areas or near a heat source for extended periods of time.
DO NOT switch the TOPODRONE SWIR on or off for short periods of time. Wait at least 30 seconds before switching the unit on or off.
DO NOT expose the TOPODRONE SWIR to moisture or dust, as the TOPODRONE SWIR is not IPXX protected and this may cause short circuits or mechanical damage to the TOPODRONE SWIR components.
DO NOT operate the TOPODRONE SWIR if there is obvious external mechanical damage.
DO NOT operate the TOPODRONE SWIR after it has been completely or partially immersed in water.DO NOT insert or remove a memory card while the TOPODRONE SWIR is in operation.DO NOT insert foreign objects not intended for use into the connectors of the TOPODRONE SWIR.DO NOT expose the TOPODRONE SWIR to shock or vibration.
DO NOT disassemble the OCEPT in any manner not described in this manual.
It is RECOMMENDED to store the TOPODRONE SWIR in the protective case in which it is supplied or in the protective case of the device for which the OCEPTIC is supplied
It is RECOMMENDED to store the TOPODRONE SWIR in conditions of relative humidity not exceeding 40% and temperature 20±5°C.