# Working with TOPODRONE DJI Air 2S PPK

> Source: https://topodrone.com/knowledge/topodrone-air2s-ppk-kit/working-with-topodrone-dji-air-2s-ppk/
> Section: TOPODRONE Air2S PPK KIT
> Updated: 2026-10-02

To get high-precision photo center coordinates correctly and operate the drone safely, strictly follow the order of work with the equipment, as well as the recommendations and requirements for operating conditions. The workflow with the TOPODRONE DJI Air 2S PPK is as follows:

1. Preliminary preparation and drone check
2. [Planning and preparing flight routes](https://topodrone.com/knowledge/topodrone-air2s-ppk-kit/route-planning-for-topodrone-dji-air-2s-ppk-hnh/)
3. [Setting up the base station and surveying the antenna phase center](https://topodrone.com/knowledge/topodrone-air2s-ppk-kit/base-station-installation-and-phase-center-coordination/)
4. [Setting and coordinating control points](https://topodrone.com/knowledge/topodrone-air2s-ppk-kit/setting-and-coordinating-control-points-SQW/)
5. [Turning on the drone and initializing the TOPODRONE receiver](https://topodrone.com/knowledge/topodrone-air2s-ppk-kit/turning-on-the-drone-and-initializing-the-topodrone-receiver/)
6. [Drone compass calibration](https://topodrone.com/knowledge/topodrone-air2s-ppk-kit/compass-calibration-topodrone-dji-air-2s-ppk/)
7. [Photo settings and camera focus](https://topodrone.com/knowledge/topodrone-air2s-ppk-kit/photo-settings-and-camera-focus/)
8. [Launching the drone on a flight mission and landing](https://topodrone.com/knowledge/topodrone-air2s-ppk-kit/launching-a-drone-on-a-flight-mission/)
9. Finishing work and checking the data