# Wi-Fi connection and setting adjusting

> Source: https://topodrone.com/knowledge/topodrone-24-zv-e10/wi-fi-connection-and-setting-adjusting/
> Section: TOPODRONE 24 (ZV-E10)
> Updated: 2024-11-11

To connect to the TOPODRONE P24 via the web interface, the following is required:

1.      TOPODRONE P24 itself with external power supply connected (VIA SHLD port or USB Type-C 2 port)

2.      Any mobile device with Wi-Fi module and web browser (mobile phone, tablet, laptop, etc.).

To connect to the TOPODRONE P24 via the web interface, do the following steps:

| 1. | Enable power on the TOPODRONE P24 and wait for 30 seconds, while camera is initializing | ![Wi-Fi connection and setting adjusting](https://topodrone.com/knowledge/i/83bbb314de89f2c8.png) |
| --- | --- | --- |
| 2. | Take your mobile device and stay somewhere not more than 10 meters around TOPODRONE P24 |
| 3. | Open Wi-Fi settings and connect to SSID: TD\_61mp, password: topodrone |
| 4. | After connection to TOPODRONE P24’s Wi-Fi open web-browser on your mobile device and go to http://192.168.10.1/ |
| 5. | You will see the camera settings interface, divided to 3 tabs: Main, Settings, HW. |

| **MAIN** |   | **SETTINGS** |   | **HW** |
| --- | --- | --- | --- | --- |