# Settings Tab

> Source: https://topodrone.com/knowledge/topodrone-24-zv-e10/settings-tab/
> Section: TOPODRONE 24 (ZV-E10)
> Updated: 2024-11-11

## This tab allows you to change camera settings, described on previous step

## Also, the following settings are also available on the settings page:

## WB - White Balance (White Balance Scenario)

## Available values: Auto/Daylight/Shade/Cloudy

## JPEG Quality - JPEG quality

## Available values: STD/Fine/X.Fine/RAW.

## \[FOCUS\] – camera will make focusing if pressed. Available in AF mode only.

## \[TAKE\] – shutter button, camera will take a picture if pressed

## \[Start video rec\] – camera will start video recording if pressed

## \[Stop video rec\] – camera will stop video recording if pressed

## \[-\] \[+\] – zoom control buttons if the lens has a zoom control

## TOPODRONE P24 requires forced cooling when recording video. Avoid overheating the camera.

## The current values of the camera parameters are displayed in the left column.

## Tab HW

## On the HW tab, use the buttons to navigate through the TOPODRONE P24 menu. This requires an HDMI connection to an external monitor. Use HW tab only for specific custom settings.

![Settings Tab](https://topodrone.com/knowledge/i/bb5623da6397861b.png)