# Maintenance and storage

> Source: https://topodrone.com/knowledge/slam-200-200e/maintenance-and-storage/
> Section: SLAM 200/200E
> Updated: 2026-10-02

## Cleaning the device

During take-off and landing, the propellers may raise dust from the ground. After a day of flights, dust may accumulate on the DMT200 body. To ensure reliable operation, it is recommended to clean the DMT200 body and connector areas after each use with compressed air or a soft brush.

## Storage requirements

Store the DMT200 in a dry, well-ventilated room at room temperature. Avoid high humidity to prevent condensation inside the device. Recommended storage conditions: relative humidity below 40%, temperature +20 ±5°C.

## Transportation

As a precision device, the DMT200 must be removed from the UAV and placed in a protective case for transportation to avoid surface damage or connector failure.