# Disassembling the equipment

> Source: https://topodrone.com/knowledge/slam-200-200e/disassembling-the-equipment/
> Section: SLAM 200/200E
> Updated: 2026-10-02

1. Before removing the antenna, disconnect the aviation connector cable from the device. Grip the metal head of the aviation connector and pull it up to remove the connector smoothly. Note that this connector is designed to prevent accidental disconnection, so pulling directly on the cable will not disconnect it.
2. To remove the antenna, press the lock button on the antenna bracket and then pull the antenna up.

![Disassembling the equipment](https://topodrone.com/knowledge/i/3945c42ed9a76b27.jpg)

| ![Disassembling the equipment](https://topodrone.com/knowledge/i/d8f748be7b5930ea.jpg) | To remove the SLAM200 battery handle, first press down the lock button at the top of the handle. Then, while holding the button, slide the scanner body forward to separate the SLAM200 main unit from the handle (battery). |
| --- | --- |